All Categories
EN

Home>Product>XPON ONU>1GE mini XPON ONU

1GE PORT FTTH XPON ONU

Model Number:STR5001X

Type:FTTx Solutions

Use:FTTH

PON Interface:1 GPON BOB (Class B+/Class C+)

Operating Temperature:0℃~+50℃

LAN Interface:1x 10/100/1000Mbps auto adaptive Ethernet interface

Wavelength:TX: 1310nm, RX: 1490nm

Optical Interface:SC/UPC Connector

Power Supply:DC 12V/0.5A

Power Consumption:<3W

Transmission distance:20KM

Receiving sensitivity:≤-27dBm/≤-29dBm

Warranty:1 Year


Service Hotline:

+86 18312481880

INQUIRY
Description

1.  Overview

● STR5001X is designed as HGU (Home Gateway Unit) in deferent FTTH solutions,The carrier-class FTTH application provides data service access.
● STR5001X is based on mature and stable, cost-effective XPON technology. Itcan switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
● STR5001X adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0 and GPON Standard of ITU-TG.984.X

2. Functional Feature

● Support EPON/GPON mode and switch mode automatically
● Support ONU auto-discovery/Link detection/remote upgrade of software
● Support Route PPPoE/IPoE/Static IP and Bridge mode
● Support IPv4/IPv6 Dual mode
● Support Firewall function and IGMP multicast feature
● Support LAN IP and DHCP Server configuration
● Support Port Forwarding and Loop-Detect
● Support TR069 Remote Configuration and maintenance
● Specialized design for system breakdown prevention to maintain stable system


 3.Application

● Typical Solution:FTTO(Office)、 FTTB(Building)、FTTH(Home)
● Typical Business:INTERNET、IPTV etc

Specifications

Hardware Specification

Technical item
Details
PON Interface
1 GPON BOB (Class B+/Class C+)
Receiving sensitivity: ≤-27dBm/≤-29dBm
Transmitting optical power:+0.5~+5dBm/+2~+7dBm
Transmission distance: 20KM
Wavelength
TX: 1310nm, RX: 1490nm
Optical Interface
SC/UPC Connector
Chip Spec
RTL9601D ,CPU 300MHz,DDR2 32MB
Flash
SPI Nor Flash 16MB
LAN Interface
1x 10/100/1000Mbps auto adaptive Ethernet interface. RJ45 connector
LED
4 LED, For Status of PWR、LOS、PON、LINK/ACT
Push-Button
2,For Function of Power on/off,Reset
Operating Condition
Temperature: 0℃~+50℃
Humidity: 10%~90%(non-condensing)
Storing Condition
Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing)
Power Supply
DC 12V/0.5A
Power Consumption
<3W
Dimension
120mmx78mmx30mm(L×W×H)
Net Weight
0.13Kg
Panel lights Introduction
Pilot
Status
Description
PWR
On
The device is powered up.
Off
The device is powered down.
PON
On
The device has registered to the PON system.
Blink
The device is registering the PON system.
Off
The device registration is incorrect.
LOS
Blink
The device doses not receive optical signals.
Off
The device has received optical signal.
LINK/ACT
On
Port is connected properly (LINK).
Blink
Port is sending or/and receiving data (ACT).
Off
Port connection exception or not connected.
Contact Us
Related Product